Epoxy.com Product #222Pigmented Water Based Epoxy CoatingMultifunctional 100% Reactive Water Based Pigmented EpoxyDESCRIPTIONEpoxy.com Product #222 WATER BASED EPOXY COATING is a two component 100% reactive water based multifunctional epoxy resin coating. Epoxy.com Product #222 WATER BASED EPOXY COATING is manufactured to produce the utmost in performance in a safe, water borne coating. Epoxy.com Product #222 WATER BASED EPOXY COATING provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. For a clear version of this product use Epoxy.com Product #223 - Water Based Curing Compound, Sealer and Bonding Agent. ADVANTAGES
PHYSICAL PROPERTIES:
USESEpoxy.com Product #222 WATER BASED EPOXY COATING can be used as a sealer or topcoat for concrete, wood, steel, or galvanized metal. Product #222 can be used where high chemical resistant coatings are a must such as: marine environments, chemical and industrial plants, power plants, food processing areas, concrete parapet walls, bridge pier caps and concrete floors. Epoxy.com Product #222 WATER BASED EPOXY COATING is available in a variety of colors. Product #222 pigmented coating can be applied to concrete as early as three days after placement. The standard colors of Product #222 are white, beige and grey. Other colors are available as special order products. APPLICATION PROCEDURESSTEEL SURFACE - Steel surfaces to receive Epoxy.com Product #222 WATER BASED EPOXY COATING should be dry grit or sandblasted to a commercial gray metal finish as specified by the Steel Structures Painting Council SP 6. All work blasted shall be coated the same day with Epoxy.com Product #1200 Zinc Rich Primer. For immersion service, blast to near white blast SSPC SP-10. CONCRETE SURFACE: Concrete surfaces to recieve Epoxy.com Product #222 WATER BASED EPOXY COATING shall be cleaned to remove dirt, curing compounds, existing coatings or laitance to provide a clean, sound bonding surface. Cleaning may be accomplished with waterblasting, sandblasting, abrasive cleaning, or other methods that would achieve a similar result. MIXING: Stir Component "B" thoroughly before mixing. Combine 2 parts by volume of "A" with 1 part by volume of "B" (mixing ratio 2:1). Mix for, not less than 3 minutes with a slow speed drill (300 to 600 rpm), and a Mixing Paddle. When mixing of Epoxy.com Product #222 WATER BASED EPOXY COATING has been completed, cover mixed material and allow an induction time of not less than 30 minutes before application. Clean equipment with soap and water. APPLICATION:Epoxy.com Product #222 WATER BASED EPOXY COATING may be applied by brush, roller or spray. All Spray equipment must employ traps to prevent water and oil from contaminating coating. COVERAGE:Epoxy.com Product #222 WATER BASED EPOXY COATING will cover approximately 200 sq. ft./gal./coat depending upon surface texture. For best results, use two (2) coats. SAFETY PRECAUTIONSRefer to the Material Health and Safety Data Sheets (MSDS forms) pertaining to this product before using. Avoid contact with skin or eyes. In the event of any eye splash or contact, immediately flush with cold water for 15 minutes and contact a physician. If skin contact occurs. wash with mild soap and water. The wearing safety glasses with side shields and impervious gloves is recommended. CAUTION: Society of the Plastics Industry (SPI) Classification (2) and Warning for sensitization or other allergic responses. Avoid inhalation of vapor. Use good ventilation, particularly if the material is heated or sprayed. Prevent all contact with skin and eyes. Wear protective clothing, goggles, gloves and/or barrier creams. FIRST AID: In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before re-use. Keep container closed. FOR INDUSTRIAL USE ONLY KEEP AWAY FROM CHILDREN |
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments Website: www.epoxy.com 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2011 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Home] [Catalog of Products] [Where to Start] [Bonding Systems] [Chip Floors] [Chemical Resistance] [Epoxy.com Coatings] [Conductive Electrostatic Dissipative] [Applications] [Elastomeric Polyurethane Systems] [Garage Floors] [High Temperature] [Industrial Floors] [Epoxy and Urethane Injection of Concrete] [Joint Systems & Sealants] [Mortars / Grouts] [Methyl Methacrylate (MMA)] [Novolac Epoxy] [Polymer Systems] [Primers Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips][Product Guide] [Wood Filler] [Who We Are] [Guide Specs][FAQs] [Tech Data Sheets in Acrobat Format] [Epoxy.com MSDS in Acrobat Format] [Epoxy.com Online Ordering Authorization Form]
|
