Epoxy.com Product #256
Impact and Chemical
Resistant Coating
DESCRIPTION:
Epoxy.com Product #256 Impact and Chemical Resistant
Coating is a 100%
solids epoxy coating specifically formulated and manufactured to
produce a
tough, impact resistant coating. Epoxy.com Product #256
is a chemically modified epoxy
and has high tensile strength and tensile elongation. These
properties prevent
cracking from impact or expansion/contraction cycles caused by
temperature
changes. Epoxy.com Product #256 will resist
chipping from impact.
ADVANTAGES:
- Epoxy.com Product #256 is a solvent free, water insensitive epoxy that can
be applied to moist or dry surfaces.
- Epoxy.com Product #256 is ideal for the encapsulation of lead paint.
- Epoxy.com Product #256 is excellent for secondary containment, on concrete, concrete
blocks or other construction materials.
- Epoxy.com Product #256 can be rolled, brushed or squeegeed.
- Epoxy.com Product #256 maintains excellent flexibility to -20° F and is not affected by
expansion/contraction cycles caused by changing temperatures.
- Epoxy.com Product #256 is resistant to hydrogen sulfide, methane and other harsh
exposures found in soil and tunnel construction.
- Epoxy.com Product #256 is used on floors, ramps, garage decks as a non-skid or non-slip
surface with an aggregate broadcast, using Epoxy.com Product #75 or Product #81 Aggregate.
- Epoxy.com Product #256 has extremely low vapor transmission rates when tested in
accordance with ASTM D-1434.
- The tensile elongation properties are locked into the epoxy molecular structure
and will not change with aging.
PHYSICAL PROPERTIES
| Colors |
Fed #595A Gray 26622 (Other colors available as special order products) |
| Viscosity @ 72°F (22.2° C) |
10,000 cps |
| Pot Life 100 grams @ 72°F (22.2° C) |
25min |
| Shore Hardness D Scale |
70 |
| Tensile Elongation ASTM D-638 |
40% |
| Tack Free Time @ 72°F (22.2°C) |
8 Hours |
| Final Cure |
7 Days |
Epoxy.com Product #256 Impact and Chemical Resistant Coating or Mortar can
be used as a mortar with the addition of 3 to 4 parts Epoxy.com Product # 76 Epoxy Extender.
This will produce a mortar with a lower modulus of elongation that will not fail
(pull away from the weaker concrete) in changing temperature cycles.
SURFACE PREPARATION
For best results, areas to receive the Epoxy.com Product #256 Impact and
Chemical Resistant Coating or Mortar must be free of dirt, grease and
laitance. Abrasive blasting, water blasting, wire brushing or shot blasting is
recommended for surface preparation. Steel should be cleaned to SSPC-SP6.
MIXING
Stir "A" Component before mixing "A" & "B" Components together.
Mix one part "A" Component to one part B component by volume for three minutes
with slow speed drill and Epoxy.com Mixing Paddle. Avoid
entrapping air.
COVERAGE
Epoxy.com Product #256 will cover 100 sq. ft/gal. applied to a smooth surface at 15 mils
thick. Two (2) coats are recommended. Coverage will decrease when applied to a rough surface.
PACKAGING
Epoxy.com Product #256 Impact and Chemical Resistant Coating or Mortar is
packaged in two (2) gallon and ten (10) gallon units.
CAUTION:
WARNING! "A" Component contains epoxy resin. DANGER! "B" Component contains
alkaline amines; strong sensitizer. May cause skin sensitization or other allergic responses. Use with good ventilation, particularly if
it is heated or sprayed. Prevent all contact with skin and eyes. Wear protective
clothing, goggles, gloves and/or barrier creams. Keep container closed
when not in use. Wash thoroughly after handling.
FIRST AID:
In case of skin contact, immediately wash with soap and water. In case of eye
contact, flush with copious amounts of water for at least 15 minutes. Remove
contaminated clothing and shoes. If irritation persists, seek medical attention.
Wash clothing before reuse.
FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2012 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;
Power Tools and Equipment 90 days; Vinyl Esters, and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
[Add this page to Favorites]
5876398
|