Outdoor Decks and Driveways

Here are a list of the products most frequently used for Outside Decks and Driveways.

Solid Colors

• Product #402  - 2 Component Chemical Resistant Coating -  is a two component₁ chemical resistant polyurethane coating with gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. Epoxy.com PRODUCT #402 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. Product is not for use in California Use Product #406 when a California Compliant low VOC product is required, or desired.

• Product #406 - Two Component Low VOC Chemical Resistant Urethane Coating -  is a low VOC compliant urethane that meets all federal and state environmental air quality standards. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention.Epoxy.com Product #406 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Product#406 can be used as a finish coating option for most Epoxy.com Flooring Systems.

•  System #485 Elastomeric Polyurethane Traffic Membrane System - is an Elastomeric Urethane Membrane System, that is liquid applied.  System #485 Elastomeric Membrane System is seamless, elastomeric (flexible), and UV.  Thee qualities make it an excellent choice for outside applications in direct sun and weather, where water tightness, durability, and excellent appearance is required. Its elastomeric properties will allow horizontal movements up to 1/8 inch without breaking. Epoxy.com System #485 has excellent abrasion and chemical resistance.  The surface of System #485 can be varied to achieve the required anti-skid and decorative look.

Multi Colors

• Product #315 Chip Flooring Product #315 is a seamless, plural component, liquid applied, 100% solids polymeric colored flake floor resurfacing system with superior wear, and chemical resistance. Product #315 with "multi-colored" flakes produces a durable, easy to maintain floor, on both new and old surfaces. The normal 315 Top Coat must be replace with clear Product #402  or Product #406  to create a sunlight forgiving  version of Chip Flooring.

Sealers

• PRODUCT #39 Silane Penetrating Sealer is a one component water based silane that provides excellent protection to concrete surfaces against attack from wet/dry, freeze/thaw cycles, and de-icing chemicals.  PRODUCT #39  imparts a hydrophobic "water-shedding" effect to concrete, masonry, brick, stone & wood surfaces. The water repellency helps reduce cracking spalling, chemical degradation, biological growth, efflorescence, and dirt pick- up.  PRODUCT #39  is easy to use and meets all current VOC regulations.

• PRODUCT #41 Silane Penetrating Sealer is a one (1) component sealer that provides excellent protection to concrete against attack from wet/dry, freeze/ thaw cycles, and de-icing chemicals. EPOXY.COM PRODUCT #41 provides a hydrophobic "water-shedding" effect to masonry surfaces. EPOXY.COM PRODUCT #41 is a penetrating sealer that is repellent to liquid water but permeable to water vapor: a "breathable" coating.

• Product #223   Clear Water Based Epoxy Curing Compound, Sealer and Bonding Agent    is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete. It is ideally suited as a cure and seal for freshly placed concrete.  Its chemical resistance makes it ideal to seal: stamped concrete, acid stained concrete, concrete countertops, parapet walls, bridge pier caps, sealing floors in food processing areas, or any other area that requires a durable, chemical resistant concrete sealer.

• Product 870 (65% Solids - Penetrating Epoxy Sealer-  is a two-component penetrating epoxy sealer (with very high solids) designed for superior protection of new concrete or for prolonging the serviceability of partially-deteriorated concrete. The sealer is a low to medium viscosity material and is capable of providing an effective membrane barrier to inhibit moisture migration and corrosive chemical penetration. In the cured state Epoxy.com Product #870 allows moisture vapor transmission; it seals off moisture entry but still allows the concrete to breath. When applied to concrete placed and finished in accordance with standards defined in ACI 201 (Guide to Durable Concrete), Product #870 greatly improves wear resistance of the concrete surface, slows down the corrosion of reinforcing steel and adds many years' life to the structure. Product #870 has a solids content of over 65% after curing. It may be applied to dry surfaces at temperatures of 40°F (0°C) or above.  

• Product #223   Clear Water Based Epoxy Curing Compound, Sealer and Bonding Agent    is a two component water based epoxy curing that is used to both cure and seal concrete and to bond freshly placed concrete to existing concrete. It is ideally suited as a cure and seal for freshly placed concrete.  Its chemical resistance makes it ideal to seal: stamped concrete, acid stained concrete, concrete countertops, parapet walls, bridge pier caps, sealing floors in food processing areas, or any other area that requires a durable, chemical resistant concrete sealer.